The Marble Process

Cultured marble is a man made product. It is a mixture of calcium carbonate (marble dust), polyester resin (an oil byproduct used as a binder) & a catalyst (initiates the curing process). The raw materials are combined in a mixer that produces the matrix (looks like cookie dough). Pigments for colored veining are injected into the matrix just before they exit the mixer. The matrix that is produced is trawled onto a mold which has been covered with a gel coat. The gel coat, which is about 20 mils thick, gives the product its glossy finish. The entire mold is then passed over a vibrating conveyor to level out the matrix & force out any air bubbles from the matrix. The product bonds to the gel coated surface & hardens in a few hours. Once we remove it from the mold the edges are ground, the surfaces buffed, & most imperfections removed. The product is then ready for installation. Spray granite & cultured granite are made much the same way with a few minor differences.

Cleaning Cultured Marble

All cultured marble & granite products have a gel coat finish that provides a non-porous, stain resistant surface. Proper care will ensure lasting beauty, elegance and function. Normal cleaning requires soap or a mild detergent. Many bathroom cleaners work well. Be sure to read the label to ensure the product is safe to use.

Do not use scouring or abrasive cleaners. Repeated use will dull the gel coat finish.

Click here for more information on cleaning...

1944 W.52nd St.
P.O. Box 24267
Savannah, Georgia 31405
P: (912) 234-1611
F: (912) 234-3363

Directions